What is "column chromatography"

Chromatography \Chro`ma*tog"ra*phy\, n. [Gr. ?, ?, color + -graphy.]

1. A treatise on colors [archaic]

2. (Chem.) an analytical and preparative technique for separating substances by differences in their selective adsorption to solids, by passing a liquid over the solid, to which the substances to be separated have usually been adsorbed in a preliminary step. The major variations are column chromatography, in which the substances to be separated are adsorbed to a column with any of a wide variety of adsorbing solids in powdered or granulated form; paper chromatography, in which the solids are applied as a spot at one end of a strip of absorbent paper (such as filter paper), and the liquid is percolated through the paper by capillary action; and thin-layer chromatography (TLC), which is similar to paper chromatography, but the adsorbent material is, instead of paper, a thin layer of finely powdered material, such as cellulose or silica, on a backing of glass or plastic, called a TLC plate. A modern version of column chromatography is high-performance liquid chromatography, usually referred to as HPLC.

n. chromatography that uses selective adsorption by a column of powders

Column chromatography in chemistry is a method used to purify individual chemical compounds from mixtures of compounds. It is often used for preparative applications on scales from micrograms up to kilograms. The main advantage of column chromatography is the relatively low cost and disposability of the stationary phase used in the process. The latter prevents cross-contamination and stationary phase degradation due to recycling.

The classical preparative chromatography column is a glass tube with a diameter from 5 mm to 50 mm and a height of 5 cm to 1 m with a tap and some kind of a filter (a glass frit or glass wool plug – to prevent the loss of the stationary phase) at the bottom. Two methods are generally used to prepare a column: the dry method and the wet method.

:* For the dry method, the column is first filled with dry stationary phase powder, followed by the addition of mobile phase, which is flushed through the column until it is completely wet, and from this point is never allowed to run dry.

:* For the wet method, a slurry is prepared of the eluent with the stationary phase powder and then carefully poured into the column. Care must be taken to avoid air bubbles. A solution of the organic material is pipetted on top of the stationary phase. This layer is usually topped with a small layer of sand or with cotton or glass wool to protect the shape of the organic layer from the velocity of newly added eluent. Eluent is slowly passed through the column to advance the organic material. Often a spherical eluent reservoir or an eluent-filled and stoppered separating funnel is put on top of the column.

The individual components are retained by the stationary phase differently and separate from each other while they are running at different speeds through the column with the eluent. At the end of the column they elute one at a time. During the entire chromatography process the eluent is collected in a series of fractions. Fractions can be collected automatically by means of fraction collectors. The productivity of chromatography can be increased by running several columns at a time. In this case multi stream collectors are used. The composition of the eluent flow can be monitored and each fraction is analyzed for dissolved compounds, e.g. by analytical chromatography, UV absorption spectra, or fluorescence. Colored compounds (or fluorescent compounds with the aid of a UV lamp) can be seen through the glass wall as moving bands.