What is "vacuum tube"

Vacuum \Vac"u*um\, n.; pl. E. Vacuums, L. Vacua. [L., fr. vacuus empty. See Vacuous.]

1. (Physics) A space entirely devoid of matter (called also, by way of distinction, absolute vacuum); hence, in a more general sense, a space, as the interior of a closed vessel, which has been exhausted to a high or the highest degree by an air pump or other artificial means; as, water boils at a reduced temperature in a vacuum.

2. The condition of rarefaction, or reduction of pressure below that of the atmosphere, in a vessel, as the condenser of a steam engine, which is nearly exhausted of air or steam, etc.; as, a vacuum of 26 inches of mercury, or 13 pounds per square inch.

   Vacuum brake, a kind of continuous brake operated by exhausting the air from some appliance under each car, and so causing the pressure of the atmosphere to apply the brakes.

   Vacuum pan (Technol.), a kind of large closed metallic retort used in sugar making for boiling down sirup. It is so connected with an exhausting apparatus that a partial vacuum is formed within. This allows the evaporation and concentration to take place at a lower atmospheric pressure and hence also at a lower temperature, which largely obviates the danger of burning the sugar, and shortens the process.

   Vacuum pump. Same as Pulsometer, 1.

   Vacuum tube (Phys.), a glass tube provided with platinum electrodes and exhausted, for the passage of the electrical discharge; a Geissler tube.

   Vacuum valve, a safety valve opening inward to admit air to a vessel in which the pressure is less than that of the atmosphere, in order to prevent collapse.

   Torricellian vacuum. See under Torricellian.

n. (context electronics English) An electrical device containing a heated filament inside an evacuated container (generally a glass tube) and used to produce rectification (a diode vacuum tube), amplification or other functions.

n. electronic device consisting of a system of electrodes arranged in an evacuated glass or metal envelope [syn: tube, thermionic vacuum tube, thermionic tube, electron tube, thermionic valve]

In electronics, a vacuum tube, an electron tube, or just a tube (North America), or valve (Britain and some other regions), is a device that controls electric current between electrodes in an evacuated container. Vacuum tubes mostly rely on thermionic emission of electrons from a hot filament or a cathode heated by the filament. This type is called a thermionic tube or thermionic valve. A phototube, however, achieves electron emission through the photoelectric effect. Not all electronic circuit valves/electron tubes are vacuum tubes (evacuated); gas-filled tubes are similar devices containing a gas, typically at low pressure, which exploit phenomena related to electric discharge in gases, usually without a heater.

The simplest vacuum tube, the diode, contains only a heater, a heated electron-emitting cathode (the filament itself acts as the cathode in some diodes), and a plate (anode). Current can only flow in one direction through the device between the two electrodes, as electrons emitted by the cathode travel through the tube and are collected by the anode. Adding one or more control grids within the tube allows the current between the cathode and anode to be controlled by the voltage on the grid or grids. Tubes with grids can be used for many purposes, including amplification, rectification, switching, oscillation, and display.

Invented in 1904 by John Ambrose Fleming, vacuum tubes were a basic component for electronics throughout the first half of the twentieth century, which saw the diffusion of radio, television, radar, sound reinforcement, sound recording and reproduction, large telephone networks, analog and digital computers, and industrial process control. Although some applications had counterparts using earlier technologies such as the spark gap transmitter or mechanical computers, it was the invention of the vacuum tube that made these technologies widespread and practical. In the 1940s the invention of semiconductor devices made it possible to produce solid-state devices, which are smaller, more efficient, more reliable, more durable, and cheaper than tubes. Hence, from the mid-1950s solid-state devices such as transistors gradually replaced tubes. The cathode-ray tube (CRT) remained the basis for televisions and video monitors until superseded in the 21st century. However, there are still a few applications for which tubes are preferred to semiconductors; for example, the magnetron used in microwave ovens, and certain high-frequency amplifiers.